EGR охладител за Камион MAN TGX EGR, EGR COOLER FOR TRUCK, AGR-KÜHLER Chłodnica spalin , Agr module, MA TGX 4

http://vogia.pl/

Below is some information about the differences between our product and the competition's product in a broad scope.

1. Tubular radiator insert - depending on the model, it is made of oval pipes with turbochargers that delay the flow of exhaust gases, resulting in better cooling. Our cartridge is consistent with the original and has the same characteristics. We do not use the so-called binoculars, i.e. two inch tubes. This serves no function.

2. Exhaust gas check valves. We ONLY use original PIERBURG first-assembly products. No "Chinese" like the competition. The use of substitutes of questionable quality often results in serious engine failures. Two valve options are available: regenerated (cleaned and chemically washed to remove carbon deposits) and new.

3. Seals and O-rings used in our products come from OE manufacturers or are manufactured according to the original model, maintaining all standards and quality of materials.

4. The mounting points are threaded and coated with copper grease, which prevents the screws from seizing and facilitates installation.

5. Throttle - each throttle is checked and regenerated. If necessary, we replace the axle, plates, and moving elements are coated with copper gr

6. Two versions of dampers are available: regenerated or new OE K+S

are regenerated without actuators and electronics, while new ones can be equipped with electronics (see the price table accordingly)

7. Throttles themselves are also available, but only new ones with or without electronics

8. Packaging - neutral cardboard packaging is not marked with our logo. This ensures that the customer will not come directly to us.

9. The body is cleaned in an industrial chemical cleaner, sandblasted, washed again and coated with a special paint

10. Thermal sticker and seals - each module has a thermal sticker that informs whether the element has been used in accordance with the procedures and has not been overheated. Seals, on the other hand, protect against interference by people. They also give us information: when, where and to whom it was sold.

11. Warranty - our products are covered by warranty for 12 months with no mileage limit. We also have product liability insurance, which covers additional costs in the event of a justified complaint (towing costs, service costs, etc.) at home and abroad.

12. Deposit - in the event of no return, it is PLN 1,500 net and is added to each recirculator sold

13. Tightness - Recirculators are tested under pressure for tightness at a load of 3 bar

14. Transport - Transport costs must be added