Хм, изглежда артикулът е продаден
View this ad in the archiveMeusburger MEUSBURGER MPS-3, Mega, Jumbo
2 900EUR
Цена без ДДС
- ≈ 5 657 BGN
- ≈ 3 129 USD
Meusburger SAnh MPS-3 MEUSBURGER MPS-3, Mega, Jumbo
5 292EUR
Цена без ДДС
- ≈ 10 323 BGN
- ≈ 5 710 USD
Meusburger MPS 1 CITY mit LBW
18 000EUR
Цена без ДДС
- ≈ 35 114 BGN
- ≈ 19 423 USD
Krone Sattelauflieger SDP 27 eLB4-CS Krone, Schiebever
23 250EUR
Цена без ДДС
- ≈ 45 356 BGN
- ≈ 25 089 USD
SCHMITZ 3 Achs Pritschenauflieger SCS 24/L-13,62 MB Jumbo, Hubdach, verzinkt,
10 800EUR
Цена без ДДС
- ≈ 21 068 BGN
- ≈ 11 654 USD
Berger SAPL24L Sattelauflieger
6 500EUR
Цена без ДДС
- ≈ 12 680 BGN
- ≈ 7 014 USD
MEUSBURGER MTS-2-10
17 900EUR
- ≈ 34 919 BGN
- ≈ 19 315 USD
KRONE 3-ACHS-AUFLIEGER Stahlauflieger mit Rungentaschen Edscha, Schiebeplane, Hecktüren
9 800EUR
Цена без ДДС
- ≈ 19 118 BGN
- ≈ 10 575 USD
Krone Sattelauflieger SDP 27 Mega.Liftachse
21 500EUR
Цена без ДДС
- ≈ 41 942 BGN
- ≈ 23 200 USD
Hoffmann HSE, Mega, Jumbo, 4x VORHANDEN!
3 900EUR
Цена без ДДС
- ≈ 7 608 BGN
- ≈ 4 208 USD
Нови Брезентово полуремарке Meusburger 4-Achs-Jumbo-Sattelauflieger mit Planenaufbau
Публикувано: 1г. 11мес.
Публикувано: 1г. 11мес.
The seller didn't indicate the price
Do you want to know prices for the similar offers?
Отворете каталогаFrame:
Welded steel frame construction – lightweight design
Frame neck ca. 110 mm – not height-adjustable
2“-king pin
Front installation dimension according to front corner measure of 2.040 mm
supporting U-beam-outer frame (strength 6 mm) for light contruction machines with a tare weight not over 17 tons
rear underrun = extended endplate
mounting rail for ramps at the rear at the endplate
prop stands at the rear
Landing legs:
Mechanical 24 to landing legs with single sided operation
Axles:
BPW-air suspension-axles (each axle with an axleload of 9 tons)
S-cam break 300/200 mm, asbestos-free brake pads
Autom. Brake adjuster
Lowering and Lifting with a total stroke of ca. 190 mm
1st axle as lifting axle, Betätigung vollautomatisch mit mechanischer Notbetätigung über Taster am Auflieger
3rd and 4th are self steering axles with electrical and mechanical lock (automatic locking of the steering of the 3rd axle when the 1st axle is lifted)
Rims and wheels:
18 steel wheels, 10-holes, with offset, centered
18 wheels 205/65 R 17,5 132/132F, tubeless.
Mudguards:
Mudguards of steel sheet with Clear Pass
Braking system:
Two line brakes with EBS
EBS-braking system (WABCO 4S3M)
Aluminium air tanks
Spring controlled parking brake
Electrical equipment:
In accordance with automotive law
24 Volt. 1x 15-pin + 2x 7-pin sockets
2x 7-chamber-rear lights in the endplate
1x holder for warning light at the rear
Side marker lights (LED)
Floor:
Glued laminated cast layer (27 mm)
DIN rails next to the longitudinal beams and with support at the outer frame = flush with the outer frame and the longitudinal beams
Covering of metal sheet over the wheels
Front panel:
Aluminum hollow sections (25 mm) till the lower edgs of the roof with integrated curtain buckles
Curtainsider:
Curtainsider on both sides with shrink-wrapped vertical and horitontal straps (distance ca. 600 mm) and curtain buckles of stainless steel
adjustable tarpaulin straps (with other-centre toggle mechanism)
tarpaulin extensions included with push button and velcro fasteners
tarpaulin extensions in direction of travel: ca. 300 mm, in height: ca. 1.000 mm
eyelets for loose tarpaulin parts included (but without extension)
2 pairs of vertical tarpaulin bags with a legth of ca. 1.300 mm, positon in the low deck at the front and the rear crank
Small bags for tarpaulin straps
Rear panel:
Steel rear portal frame with lateral suspension device for the tarpaulin
Aluminium-double-wing doors (25 mm)
Both door leaves fully convertible with door-stay
Each door leaf with aluminium double joint-hinge and two embedded recessed grips
Rear panel with side extension of ca. 1.250 mm on each side mechanical through crank
Front corner posts:
In roof height, bolted on the face
Middle posts:
3 pairs of posts – stepless movable
The posts are movable over the whole length through trolleys and lockable at every position
Roof:
EDSCHA-sliding roof (galvanised) with lateral bowsmovable in 1 direction (compressed to the front in the cargo space), without tendency
The rear panel-crossbeam is pivoted
PVC-tarpaulin roof without custom seal
Lifting roof is on both sides adjustable mechanically, stroke: 300 mm
Lifting roof is mobile in an increased position - front (+8x 50 mm) and rear (+9x 50 mm)
Roof can be decreased at the front to a total height of 3.950 mm
Tarpaulin extension included and tarpaulin bib at the rear
Edscha-sliding rails at the front on both sides can be extended mechanically (900 mm)
Painting:
Cleaning with steel pellets and priming
Painting chassis and hubs: in RAL
Outer frame, landing legs and posts: in RAL
Front and rear panel in RAL 9006 silver
tarpaulin in RAL 9006 silver
rims in silver
plastic parts black unpainted
without labelling
lateral part-marking over the buckles and at the top in the corners in yellow
full marking at the rear in yellow
Additional equipment:
4 wheel chokes with holder at the front panel
Licence plate holder at the endplate
2 ECE-sheets
Side underrun guards (aluminium)
12 pairs of lashing rings embedded in the outer frame (each of 4 tons)
7 pairs of heavy load-lashing rings (foldable / each of 8 tons)
2 pairs of spare wheel holder with winch at the front panel
3 rows of bows (aluminium), self-locking hooks included Extendable warning plates with position lights, stepless extendable till a cargo width of 5.000 mm
1 PVC-tool box (500x300x450 mm)
Deposit for ramps behind the last axle
Ladder (aluminium) with holder at the front panel
Night parking panel and ADR-panel at the rear panel
The seller didn't indicate the price
Do you want to know prices for the similar offers?
Отворете каталога